The failures of blenders are manifested as motor overheating, failure to start, damage to internal components and bearing fractures. In severe cases, it may even catch fire. Different failures have different solutions, and good maintenance is also required in the later stage.

In case of motor failures, please do not disassemble and repair it privately. This situation involves many factors. The common ones are failures of the circuit controller, short circuits in the wiring, and malfunctioning buttons. It is necessary to take it to the designated professional maintenance points for repair.

Malfunctioning buttons are also a common failure. If the usage period is too long, the buttons may have poor contact, and the connected wires may age and break. In this case, the components under the buttons need to be replaced.

In case of bearing fractures, the bearings need to be replaced. Please note that they should be of the same model. Different sizes and clip types have different designs. When it comes to the price, you can consider those of good quality.If the blender sensor fails, the sensor components also need to be replaced. Although the price is not very high, professional skills are also required for the replacement.

Irregular maintenance can reduce the occurrence of blender failures. Common maintenance methods are as follows:

1、Clean the dust on the surface or inside.

2、Add sufficient lubricating oil to the bearings.

3、Use it under a safe voltage.

4、Store it in a dry environment.

The above is the failure analysis of blenders and common maintenance tips. Every detail in life is important!